Publications by Dr. Christopher G. Keller

Chris Keller, founder of MEMS PI, has a BS in chemistry from Michigan State University, an MS in science education from the University of Tennessee (Knoxville), an MS in engineering science and mechanics from the Georgia Institute of Technology, and a PhD in materials science from the University of California at Berkeley. Additionally, he has 13 years working experience

Disclosures:

• "Method for Molding High-Aspect Ratio CVD Structures"
  
  
• "Microfabricated Membrane Filter with Precise Pore Location and Pore Geomery"
  
  
• "Plated Copper and Solder Structures for Micromachines"
  
  
  
• "Dual Actuators for magnetc Recording Disk Drive"
  
  
• "Method and Apperatus for Cleaning the Slider ABS"
  
  
• "Start-Up Assist by Resonant Actuator Drive"
  
  
• "Chemical Filter for Magnetic Disk Data Storage Device"
  
  
• "Self-Cleaning Rigid Disk Head/File Design"
  
  
• "Tandem Head Arm process and Tooling"
  
  
• "Method for Burnishing Substrates"
  
  
• "Zero Pitch Burnish Head"
  
  

Technical Reports:

• "Introduction to Failure Analysis for Hard Disk Drives with Problems at the Head/Disk Interface"
  
  
• "Removing Swaged Suapensions from magnesium Arms"
  
  
• "Magnetic Recording on Centimeter long Fiber Array for Maximum Data density"
  
  

Publications:

• "Milli-Scale Polysilicon Structures"
  
  
• "Nickel-Filled Hexsil Thermally Actuated Tweezers"
  
  
• "Hexsil Bimorphs for Vertical Actuation"
  
  
• "Milli-Scale Polysilicon Structures"
  
  
• "Milli-Scale Polysilicon Structures"
  
  
• "2nd Annual BioMEMS 2000 june 22-23,2000 San Francisco"